Thermo-Floor AS will at the ISE 2015 in Amsterdam launch the first electronic thermostat incorporating Z-Wave technology for regulating electric floor heating systems.
Heatit Z-Wave is an electronic thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Sensio, Vera, Zipato and others.
The Heatit Z-Wave thermostat is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors.
The display will show the ambient temperature, either in the room or in the floor.
The thermostat is equipped with sensitive cap sense buttons. By lightly pressing the buttons, the display will show the set value.
Available in both black or white color.
- Room sensor
- Floor sensor
- Temperature limiter
- Power regulator
- Z-Wave chip 500 series
- Weekly program via gateway
- Setback mode via gateway or pilot wire
- 7-segment LCD-screen
- Can be used in connection with different NTC-sensors
- Lock mode/child lock
- 8 scenarios
|5430499||Heatit Z-Wave thermostat||White RAL 9003|
|5430498||Plastic kit for Heatit Z-Wave thermostat||Black RAL 9011|
For more information, visit www.heatit.com
Pål Aksel Forberg
+47 95 98 77 77
Thermo-Floor AS is a Norwegian company specializing in electrical heating solutions. For more than 20 years we have been one of the market leaders in Norway, and our product range is continuously expanding. We offer a wide selection of heating cables and heating mats, as well as complete temperature control systems both for indoor and outdoor use. The combination of our heating products and thermostats are cost effective and environmental friendly at the same time. Thermo-Floor AS is committed to offering heating solutions to match both present and future needs.
We are ISO 9001 and ISO 14001 certified.